We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Yamaha DBR10 Active PA Speaker
Availability: In stock
SKU
CDBR10UK
£389.00
Representative Example:
A loan of £2,000.00 over
48 months
will cost you £54.32 per month
at a representative 14.90% APR.
The total cost after 48 months
is £2,595.40,
which includes £595.40 interest
at 14.90% fixed and a £0 fee.
The total amount of credit is £2,553.42.
Check your eligibility
Fast check - won't affect your credit rating.
Seen it cheaper? We aim to match authorised UK dealers
Quick overview
The DBR10 Active PA speaker features the same Yamaha state-of-the-art DSP technology inherited from its predecessors, ensuring superior performance and versatility, and safe, consistent operation.
- See full product description
- Buy 2 for £379.00 each and save 3%
The DBR10 Active PA speaker features the same Yamaha state-of-the-art DSP technology inherited from its predecessors, ensuring superior performance and versatility, and safe, consistent operation.
The DBR10 can project deep bass, clear midrange and accurate high frequencies to the outer-most edges of a very wide coverage area and can boast 700W of power.
The design incorporates an optimised 50° wedge angle for floor monitoring use and is also, for its size, the most portable powered speaker currently offered by Yamaha.
- Equipped with: 10" + 1"
- Power: 700 W Peak, 350 W RMS
- Peak SPL: 129 dB
- Frequency range: 55 - 20,000 Hz
- Dispersion pattern: 90 x 60 degrees
- Internal 2 channel mixer with XLR, TRS and RCA inputs
- 4-Stage fan
- Monitor tilt
- 2 x M8 Rigging points
- Dimensions (W x H x D): 308 x 493 x 289 mm
- Weight: 10.5 kg
- Speaker type - 2-way, Bi-amp powered speaker, Bass-reflex type
- Frequency range (-10dB) - 55Hz - 20kHz
- Nominal coverage H - 90°
- Nominal coverage V - 60°
- Components LF - Diameter:10" cone, Voice Coil:2", Magnet:Ferrite
- Components HF - Diaphragm:1", Type: 1" throat compression driver, Magnet:Ferrite
- Crossover - 2.1kHz: FIR-X tuning™ (linear phase FIR filter)
- Output power - Dynamic:700 W (LF: 500 W, HF: 200 W) / Continuous: 325 W (LF: 260 W, HF: 65 W)
- Maximum output level (1m; on axis) - 129dB SPL
- I/O connectors - INPUT1: Combo x1, INPUT2: Combo x 1 RCA pin x 2 (Unbalanced), OUTPUT: XLR3-32 x 1 (CH1 Parallel Through or CH1 CH2 Mix)
- Processors - D-CONTOUR: FOH/MAIN, MONITOR, OFF
- Heat dissipation - Fan cooling, 4 speeds
- Power requirements - 100 V, 100-120V, 220-240 V, 110/127/220V (Brazil), 50/60Hz
- Power consumption - 60W(1/8 Power Consumption), 18W(Idle)
- Cabinet material - Plastic
- Finish - Black
- Handle - Top x 1
- Flying and mounting hardware - Bottom x 2 (Fit for M8 x 15 mm eyebolts)
- Pole socket - 35mm (Bottom x 1)
- Dimensions:
- -W - 308mm (12.1")
- -H - 493mm (19.4")
- -D - 289mm (11.4")
- Net weight - 10.5 kg (23.2 lbs)
Got a question or need assistance? Get in touch, we're happy to help.
02380 784500.