Total £0.00

Laserworld BeamBar10-RGB Laser Lighting Effect

Finance this item from as little as per Month

Click For Options

Powered By Pay4later

Condition : New

Be the first to review this product


You'll earn 9240 Reward Points for this item

Quick Overview

The Laserworld BeamBar10 RGB is a high-performing laser lighting effect equipped with three green laser diodes, four red laser diodes and three blue laser diodes.

BeamBar10-RGB Angle 1


The Laserworld BeamBar10 RGB is a special laser effect that creates fans of vibrantly coloured laser beams and can be controlled via DMX, stand-alone mode or sound-activated mode. The BeamBar10 RGB comes with 10 single beam laser outlets, three are equipped with a green DPSS laser diode with 80mW of power and a wavelength of 532nm, four are equipped with a red diode with 150mW of power and a wavelength 650nm and the other three are equipped with a blue diode with 140mW and a wavelength of 470nm.

This premium show laser provides you with an analogue modulation source resulting in better colour fading as well as a much broader colour hue; these features make the Laserworld BeamBar lighting effects ideal for any application that requires a high-performing laser with a wide range of colour tones and colour fadings. The BeamBar10 RGB is a perfect lighting effect for stages, live events and large nightclubs as well as TV shows and show productions.

Each of the ten laser beams can be individually aligned via a 4-point alignment system that is accessed from the front of the device meaning you don’t need to open the housing of the unit for alignment adjustments. The BeamBar10 RGB features 13 DMX channels allowing each laser source to be controlled individually; this makes it possible to create multiple different chaser, beam or fan effects. Thanks to the standard DMX compatibility the BeamBar10 can be easily integrated into existing lighting setups. This high-performing laser also features a master/slave mode, simply connect via DMX to a master projector and the slave projector will create the same patterns as the master laser.

  • Very bright colors
  • Very affordable
  • A very good beam profile
  • Total Power typical: 1'350mW
  • Guaranteed power: 1'200mW
  • Power Red: 4 x 150mW / 650nm
  • Power Green: 3 x 80mW / 532nm
  • Power Blue: 3 x 140mW / 470nm
  • Beam Specifications: ca. 3mm / <1.5mrad
  • Laser Sources: Diode, DPSS
  • Laser Class: 3B
  • Operation Modes: DMX, stand-alone, sound-to-light, master-slave
  • Accessories: Interlock connector, manual, key
  • Power Supply: 100V - 250V AC 50/60Hz
  • Power Consumption: 50W
  • Dimensions (LxWxH): 1000 x 160 x 85mm
  • Weight: 9.0 kg

Write Your Own Review

Only registered users can write reviews. Please, log in or register