Total £0.00

Pioneer XPRS12 2400watt peak Active PA Speaker

Finance this item from as little as per Month

Click For Options

Powered By Pay4later

Condition : New

Be the first to review this product


You'll earn 11290 Reward Points for this item

Quick Overview

The Pioneer XPRS12 is the new 12-inch, wooden cased, two-way full range, active speaker from the Pioneer DJ XPRS range. The Powersoft Class D amps provide an impressive 2400watt peak and 1200watt continuous output.
Pioneer XPRS12  main image


The Pioneer XPRS12 is the new 12-inch, wooden cased, two-way full range, active speaker from their XPRS range.  Within the 15mm birch plywood casing are powerful yet energy efficient Powersoft Class D amps, 12-inch ferrite LF driver, 1.75-inch titanium diaphragm compression driver, AFAST technology (from Pioneer Pro Audio) and four EQ modes with in-built DSP all to aid in the top-quality, deep bass range and precise sound output you would expect from Pioneer.  The frequency response is 50Hz to 20kHz, maximum SPL is 135dB and the crossover frequency is 2.0kHz.

Pioneer Pro Audio - XPRS Series Active Speaker Introduction

The Powersoft Class D amps provide an impressive 2400watt peak and 1200watt continuous output.  The active speaker is able to offer a dependable performance, energy efficiently, due to the Power Factor Correction (PFC) it incorporates.  The XPRS12 contains an auto-ranging power supply which means that the speaker can be used worldwide; using whatever power is available and still produces the clear and exact high-class sound. 

The first-rate ferrite LF and compression driver are both used to deliver a concise and complete array of sound with minimal distortion even when the sound it at its highest.  The AFAST technology is mainly aimed at lessening standing waves that may create a muffled response in the low to mid ranges.  There is an acoustic tube fixed inside the active speaker which takes in the standing waves resulting in a growth of low frequency response. 

Situated on the rear of the Pioneer XPRS12 active speaker are buttons which allow direct access to the four EQ modes; Bass+ (increases the bass for dance music), Flat (source audio is at neutral), Wedge (to be used when speaker is placed on the floor as it lessens the low frequencies) and Speech (used for clearer vocals e.g. presentation). 

The speaker is lightweight and easily transportable and includes specifically placed handles to assist with spreading out the weight.  The XPRS12 can be either pole-mounted or placed on the floor and has the option to be used as a fold back monitor for any stage performances.  The speaker can be mounted horizontally or vertically by using the rotatable horn on the speaker giving a 90x60 degree distribution and 90 degree rotation or tilted to 7 degrees.  There are many input and outputs for the XPRS12 speaker which include two balanced XLR/TRS combo sockets, two unbalanced RCA connections, two XLR through output, 1 XLR mixed output and a MIC/AUX connection.

Finally the Pioneer two-way active speaker incorporates thermal limiting features (to look after the amp and speaker) including:

  • Thermal limiter – avoids overheating
  • DC offset removal – speaker shuts down as damage prevention if the speaker blows.
  • Input voltage limiter – RMS and Peak
  • Output voltage limiter – shuts off the LF and compression drivers individually when either reach their peak
  • AC mains over voltage protection – guards against power surges
  • Output overcurrent – minimises the speaker’s output to a safe level in the event of an output overcurrent
  • Stationary high frequency loud signals – guards the speaker from loud bursts like feedback

Overall the Pioneer XPRS12 is a high-quality, robustly built, technology packed active speaker that is suitable for any environment (no matter how big/small) or location, worldwide!

Model Name

Speaker Type

12" 2-way full range, bass reflex, bi-amp, active speaker

System characteristic

 Frequency  Response
 (–10 dB)

50 Hz to 20 kHz

 (H x V)

90° x 60° (rotatable)

 Maximum SPL

135 dB

 Crossover  Frequency

2.0 kHz


 Amplifier type

Class D

 Power Rating

2400 W peak / 1200 W cont. (LF800 W/HF400 W)

 Input connectors

2x XLR/TRS Combo (balanced), 2x RCA (unbalanced)


10 kΩ

 Output connectors

2x Through output XLR (balanced)
1x Mixed output XLR (balanced)


 LF driver

12-inch ferrite LF cone driver

 HF driver

1.75-inch titanium diaphragm neodymium compression driver


15 mm birch plywood, bass reflex type


Impact-resistant, black semi-matt textured


2 (on both sides)

 Pole socket

35 mm socket (0°/7° multi-angle)

 Rigging point

12x M10


 Amplifier Protection

Thermal limiting, over-temperature muting, output overcurrent

 Driver Protection

DC offset removal, stationary high frequency loud signals, input voltage limiter (Peak/RMS)

 Power unit  Protection

Primary AC mains overvoltage protection, Primary AC mains overcurrent protection

 Power unit/other

 Supported voltages

100 V (50 Hz/60 Hz) / 110 V to 240 V (50 Hz/60 Hz)

 Power consumption

167 W

 (W x H x D)

380 x 647 x 398 mm


23.1 kg

Write Your Own Review

Only registered users can write reviews. Please, log in or register