Share
Login to earn Reward Points for sharing!

Alto Professional TS310 2000w 10-Inch Active Loudspeaker

Availability:Out of stock
SKU
Alto TS310
Special Price £329.00

Was: £339.00 Save £10.00

Seen it cheaper? We aim to match authorised UK dealers

Quick overview

This product is no longer available - please click here to view our latest range of Alto Speakers.

The Alto Professional TS3 series is a brand new range of professional loudspeakers that come equipped with a 10-inch woofer and 1.4-inch compression driver that work in perfect unison to give you the most precise, natural sound possible.

  • See full product description

The Alto Professional TS3 is a brand new series of speakers that deliver a clear yet explosive sound and is a great audio solution for any style of music. The TS310 features a bi-amplified design that gives you high-quality audio without any restrictions or compromises and is suitable for a range of applications including mobile entertainers, schools and colleges, live events, music venues, club and bar venues, and theatres.

The rear of the speaker features an integrated 2-channel mixer with two combo XLR/¼-inch inputs; each input comes with a volume control so you can go directly from your audio source into the system with no hassle. There is also an XLR link output for linking multiple units together and an IEC power input alongside a ground-lift switch and a contour switch that allows you to apply a small amount of equalisation if needs be. To prevent the speaker from overloading this speaker is equipped with a transducer overdrive protector that stops you from overloading the system when your signal is too loud, it also works to eliminate distortion at high volumes, and you can see when the speaker has overloaded thanks to a clip limiter LED.

The TS310 is equipped with a 10-inch woofer alongside a 1.4-inch tweeter that both work in perfect synch to deliver a smooth sound with a frequency response that ranges from 54 Hz all the way to 20 kHz and can reach a maximum sound pressure level of 129dB. This speaker is driven by a 2000w Class D amplifier while brand new transducers provide you with the cleanest possible sound. Thanks to the intelligent, super-robust design this speaker can be used as either a main front of house speaker or as an on-stage monitor.

The TS310 loudspeaker is housed in a super-robust injection-molded polypropylene cabinet that has been designed for rigorous use, so you know it can withstand the stresses of everyday use and also features an acoustically transparent perforated steel grille that prevents the drivers from being damaged. The cabinet is equipped with a 36mm standard pole mount alongside multiple M10 rigging points that enable you to mount the speaker into almost any area with ease while two handles make transporting the speaker an easy process.

Alto TS310 Key Features

  • 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
  • 10-inch (254 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
  • 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
  • High quality, lightweight, cabinet design for easy transport, set up and installation
  • Pole-mountable, wedge monitor, bracket installation or flown application with integral M10 suspension points
  • Integrated 2-channel mixer with dual XLR ¼-inch combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch and Ground-Lift switch
  • Custom engineered high-efficiency class D amplifiers with passive cooling design – No fan means the speaker runs cleaner, quieter and has greater long-term reliability
  • Design Origin: Designed and tuned in the USA

Alto TS310 Tech Spec

  • Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
  • LF Driver: 10-inch (254 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
  • HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
  • Crossover: 2.5 kHz
  • Maximum SPL: 129 dB peak, 126 dB continuous (dB SPL @ 1 m)
  • Frequency Response: 54–20 kHz (+/- 3 dB)
  • Frequency Range: 48 Hz–22 kHz (-10 dB)
  • Horn Coverage: 90° H x 60° V nominal
  • Equalization: Contour Switch Low and High Frequency +3dB Boost
  • Connectors: (2) XLR/TRS ¼” (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
  • Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch
  • Indicators: 2 x Power LED (front and rear), Clip limiter LED
  • Protection: Electronic clip, Thermal and transducer overdrive protection
  • Power Connection: IEC with Mains Fuse
  • AC Voltage Input: 100,110–120,220–240 V, 50/60 Hz
  • Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
  • Mounting/Installation: 36 mm standard pole mount, Wall or celling mount using
  • TSB810 bracket, Flown application with integral M10 suspension points, Wedge monitor
  • Dimensions (HxWxD): 524mm x 320mm x 300mm
  • Net Weight: 11.9 kg.
  • Design Origin: Designed and tuned in the USA
  • Accessories: TSB810 Bracket, TS210 Cover

Got a question or need assistance? Get in touch, we're happy to help.

02380 784500.

See what our customers say

Our Values & Promises

The DJ Shop prides itself on providing outstanding customer service, is a powerhouse of knowledge and retails superior quality brands within the DJ and Music Production industry.

DJ Finance

The DJ Shop is the UK's leading DJ Equipment Finance retailer and liaises with some of the most prestigious DJ Finance lenders in the UK.

Delivery & Returns

Discover our flexible delivery options including free and next day availability, along with The DJ Shop's fair returns and usage policy.