Total £0.00

OM Q.Bert


Condition : New

Be the first to review this product


You'll earn 650 Reward Points for this item

Quick Overview

OM Q.Bert is a cartridge co-designed by DJ Q.Bert and is a must have for DJs who take scratching seriously.


Ortofon OM Q.Bert is an overhead mounted cartridge co-designed by DJ Q.Bert purposefully made for scratch DJs. The ultra high output, great tracking ability and low wear put this cartridge in a class of its own. Its needle traces the grooves of your records superbly and has been tailored for scratch DJs
The Q.Bert minimises surface noise made by worn vinyl by featuring a more subdued high end, but an accentuated mid-range makes sure to bring scratching to the forefront of your mix.

  • Output voltage at 1000Hz, 5cm/sec: 11 mV
  • Channel balance at 1kHz: 1,5 dB
  • Channel separation at 1kHz: 22 dB
  • Frequency range at -3dB: 20-18.000 Hz
  • Frequency response: 20-20.000 Hz -3 dB
  • Tracking ability at 315 Hz at recommmended tracking force: 980 μm
  • Compliance, dynamic lateral: 12 μm/m N
  • Stylus type: Spherical
  • Stylus tip radius: R 18 μm
  • Tracking force range: 2,0-4,0 g (20-40 mN)
  • Tracking force recommended: 3,0 g (30 mN)
  • Tracking angle: 20°
  • Internal impedance, DC resistance: 1.680 Ohm
  • Internal inductance: 920 mH
  • Recommended load resistance: 47 kOhm
  • Recommended load capacitance: 200-400 pF
  • Cartridge weight: 18,5 g
  • Replacement stylus unit: Q.Bert

Write Your Own Review

Only registered users can write reviews. Please, log in or register