Total £0.00

Concorde Q.Bert


Condition : New

Be the first to review this product


You'll earn 1000 Reward Points for this item

Quick Overview

Ortofon Concorde Q.Bert has been designed by DJ Q.Bert and is a must have cartridge for scratch DJs.


Ortofon Concorde Q.Bert is a cartridge co-designed by DJ Q.Bert purposefully made for scratch DJs. The ultra high output, high tracking ability and low wear put this cartridge in a class of its own. Its needle traces the grooves of your records superbly and has been tailored for scratch DJs

The Q.Bert minimises surface noise made by worn vinyl by featuring a more subdued high end, but an accentuated mid-range makes sure to bring scratching to the fore front of your mix.

  • Output voltage at 1000Hz, 5cm/sec: 7 mV
  • Channel balance at 1kHz: 1,5 dB
  • Channel separation at 1kHz: 25 dB
  • Channel separation at 15 kHz: 15 dB
  • Frequency range at -3dB: 20-20.000 Hz
  • Frequency response: 20-15.000 Hz 3dB/-2dB
  • Tracking ability at 315 Hz at recommmende tracking force: 80 μm
  • Compliance, dynamic lateral: 6 μm/m N
  • Stylus type: Spherical
  • Stylus tip radius: R 18 μm
  • Tracking force range: 3,0-5,0 g (30-50 mN)
  • Tracking force recommended: 4,0 g (40 mN)
  • Tracking angle: 20°
  • Internal impedance, DC resistance: 750 Ohm
  • Internal inductance: 450 mH
  • Recommended load resistance: 47 kOhm
  • Recommended load capacitance: 200-600 pF
  • Cartridge weight: 18,5 g

Write Your Own Review

Only registered users can write reviews. Please, log in or register