Share
Login to earn Reward Points for sharing!

Alto Professional TS308 2000w 8-Inch Active Loudspeaker

Availability: Out of stock
SKU
Alto TS308
Special Price £265.00

Was: £279.00 Save £14.00

Seen it cheaper? We aim to match authorised UK dealers

Quick overview

This product is no longer available, please click here to view the latest Alto Professional speaker range.

The Alto Professional TS308 is a 2000w loudspeaker that is equipped with an 8-inch driver alongside a 1.4-inch compression driver and features a bi-amplified design that delivers an explosive sound without any compromises or restrictions.

  • See full product description

The Alto Professional TS3 series is a brand new range of professional loudspeakers that work to deliver an excellent audio solution for any performance or installation challenge. The bi-amplified design provides you with 2000w of peak power and offers an explosive sound without any compromises or restrictions and is perfect for both fixed and mobile applications including mobile entertainers, schools and colleges, music venues, live events, club and bar venues, and theatres.

The rear of the speaker features two combo XLR/¼-inch TRS inputs with an integrated 2-channel mixer that allows you to connect directly to an audio source and gives you volume controls for each input. Also on the rear is an XLR link output for linking multiple units together and an IEC power input as well as a power on/off switch, ground-lift switch, and a contour switch that lets you apply a small amount of EQ if you require. The TS308 also comes with a transducer overdrive protector that prevents you from overloading the speaker with too loud of a signal; it also works to eliminate distortion when listening at high volumes and there is a clip limiter LED that indicates when you’re signal is too hot.

The TS308 comes equipped with an 8-inch low-frequency woofer alongside a 1.4-inch high-frequency neodymium driver with a precision waveguide and a crossover point of 2.5 kHz. Both drivers work in perfect sync to give you a frequency response that ranges from 62 Hz to 20 kHz with a maximum sound pressure level of 129dB. This speaker is fitted with a custom engineered, highly-efficient Class D amplifier that features a passive cooling design that helps the speaker run cleaner and quieter and gives you long-term reliability. The speaker works brilliantly as either a main front of house speaker or as an on-stage monitor thanks to the intelligent design and excellent sound.

The TS308 is housed in a trapezoidal injection-molded polypropylene enclosure that is super-robust and designed to withstand the stresses of everyday on-stage use and comes with a full perforated steel grille that protects the drivers from damage and is acoustically transparent. The cabinet is fitted with a 36mm standard pole mount so you can mount it to a speaker pole with ease, or make use of the multiple M6 suspension points that enable you to install the speaker into any area. The addition of rubber feet means that when the speaker is being used as an on-stage monitor you do not scratch the bottom.

Alto TS308 Key Features

  • 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
  • 8-inch (203 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
  • 1.4-inch (35 mm) voice coil, neodymium magnet HF driver, with precision wave guide
  • High quality, lightweight, cabinet design for easy transport, set up and installation
  • Pole-mountable, wedge monitor, bracket installation or flown application with integral
  • M6 suspension point
  • Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch and Ground-Lift switch
  • Custom engineered high-efficiency class D amplifiers with passive cooling design – No fan means the speaker runs cleaner, quieter and has greater long-term reliability
  • Design Origin: Designed and tuned in the USA

Alto TS308 Tech Spec

  • Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
  • LF Driver: 8-inch (203 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil
  • HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide
  • Crossover: 2.5 kHz
  • Maximum SPL: 129 dB peak, 126 dB continuous (dB SPL @ 1 m)
  • Frequency Response: 62 Hz–20 kHz (+ 3dB)
  • Frequency Range: 52 Hz–22 kHz (-10 dB)
  • Horn Coverage: 90° H x 60° V nominal
  • Equalization: Contour Switch Low and High Frequency +3dB Boost
  • Connectors: (2) XLR/TRS ¼” (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
  • Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch
  • Indicators: 2 x Power LED (front and rear), Clip limiter LED
  • Protection: Electronic clip, Thermal and transducer overdrive protection
  • Power Connection: IEC with Mains FuseAC Voltage Input: 100,110–120,220–240 V, 50/60 Hz
  • Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
  • Mounting/Installation: 36 mm standard pole mount, Wall or celling mount using TSB810 bracket, Flown application with integral M6 suspension points, Wedge monitor
  • Dimensions (HxWxD): 434mm x 256mm x 245mm
  • Net Weight:9.2 kg.
  • Design Origin: Designed and tuned in the USA
  • Accessories: TSB810 Bracket, TS208 Cover

Got a question or need assistance? Get in touch, we're happy to help.

02380 784500.

See what our customers say

Our Values & Promises

The DJ Shop prides itself on providing outstanding customer service, is a powerhouse of knowledge and retails superior quality brands within the DJ and Music Production industry.

DJ Finance

The DJ Shop is the UK's leading DJ Equipment Finance retailer and liaises with some of the most prestigious DJ Finance lenders in the UK.

Delivery & Returns

Discover our flexible delivery options including free and next day availability, along with The DJ Shop's fair returns and usage policy.