CATEGORIES
View All Alto DJ Equipment.
Alto APX1000 Power Amplifier £219.00
click on thumbnail to enlarge
Alto APX1000 Power Amplifier
Product Description:
The Alto APX1000 power amplifier delivers continuous, clean, stereo power to any live performance. Whether you are a sound contractor, gigging musician or live sound engineer, you need consistently clean power from your power amplifiers and the APX1000 brings it to every performance. The APX1000 provides a continuous 2 x 250W at 8ohms, or 2 x 500W at 4 ohms. In bridged mono mode, the APX1000 pumps out 1000 crystal-clear watts of power. Weighing in at only 12.1 lbs., the APX1000 goes into venues with amazing ease and convenience whether used in a permanent installation or portable application. The incredible power to weight ratio and performance quality of the APX 1000 means you`ll get solid Class D power without breaking your back or your wallet.
Things can sometimes move at light speed on the stage. Connecting an amp should never slow you down. Balanced combo quarter inch XLR, inputs, Touch proof binding posts and speakon jacks make connecting the APX1000 a snap at any gig, so you never lose precious time getting things going. Once installed, the APX1000`s level and clip indicators to keep you informed of performance levels at a glance. Experience the APX1000 for yourself, or check out the APX1500 for installations and gigs requiring a little more power.
The APX1000 amplifier supplies massive power with plenty of headroom to drive any passive speaker. The APX1000 also contains low-noise cooling fans to prevent overheating and high current toroidal transformers for the lowest possible noise floor.
TECH SPEC:
Power Specifications:
Continuous power (20 Hz 20 kHz):
Both channels driven: 2 x 390 W at 4 ohms, 2 x 250 W at 8 ohms (0.5% THD), 2 x 500 W at 4 ohms, 2 x 270 W at 8 ohms (1.0% THD EIAJ)
Bridged mono mode: 1 x 1000 W at 8 ohms, 1 x 520 W at 16 ohms
Input Sensitivity: 1.0 V
Input Impedance: 10 K Unbalanced
Frequency Response: (at 10 dB below rated output power), 20 Hz - 25 KHz (+0/-3 dB)
Voltage Gain: 32 dB
Distortion: (SMPTE-1M) [0.5%
S/N Ratio: 110 dB
Protection: On/Off, mute, DC-fault, load
Controls Front: Front Controls: AC power switch, 2 channel level control; ∞ to +30 dB
Controls Rear: 30 Hz high-pass filter on/off, bridge/stereo/parallel mode
Signal Indicators: Signal present (green LED), clip (red LED), protection (red LED)
Power Indicators: 1 blue LED integrated with power switch
Input Connectors: Balanced XLR-F / combo
Output: Touch proof binding posts and Speakon NL4 connectors
Power Supply: AC Power: 100 VAC, or 110 120 VAC or 220 - 240 VAC (50 / 60 Hz)
Dimensions (WxLxH): 19in x 11.2in x 3.5in
Weight 12.1 lb
Tweet
The Alto APX1000 power amplifier delivers continuous, clean, stereo power to any live performance. Whether you are a sound contractor, gigging musician or live sound engineer, you need consistently clean power from your power amplifiers and the APX1000 brings it to every performance. The APX1000 provides a continuous 2 x 250W at 8ohms, or 2 x 500W at 4 ohms. In bridged mono mode, the APX1000 pumps out 1000 crystal-clear watts of power. Weighing in at only 12.1 lbs., the APX1000 goes into venues with amazing ease and convenience whether used in a permanent installation or portable application. The incredible power to weight ratio and performance quality of the APX 1000 means you`ll get solid Class D power without breaking your back or your wallet.
Things can sometimes move at light speed on the stage. Connecting an amp should never slow you down. Balanced combo quarter inch XLR, inputs, Touch proof binding posts and speakon jacks make connecting the APX1000 a snap at any gig, so you never lose precious time getting things going. Once installed, the APX1000`s level and clip indicators to keep you informed of performance levels at a glance. Experience the APX1000 for yourself, or check out the APX1500 for installations and gigs requiring a little more power.
The APX1000 amplifier supplies massive power with plenty of headroom to drive any passive speaker. The APX1000 also contains low-noise cooling fans to prevent overheating and high current toroidal transformers for the lowest possible noise floor.
TECH SPEC:
Power Specifications:
Continuous power (20 Hz 20 kHz):
Both channels driven: 2 x 390 W at 4 ohms, 2 x 250 W at 8 ohms (0.5% THD), 2 x 500 W at 4 ohms, 2 x 270 W at 8 ohms (1.0% THD EIAJ)
Bridged mono mode: 1 x 1000 W at 8 ohms, 1 x 520 W at 16 ohms
Input Sensitivity: 1.0 V
Input Impedance: 10 K Unbalanced
Frequency Response: (at 10 dB below rated output power), 20 Hz - 25 KHz (+0/-3 dB)
Voltage Gain: 32 dB
Distortion: (SMPTE-1M) [0.5%
S/N Ratio: 110 dB
Protection: On/Off, mute, DC-fault, load
Controls Front: Front Controls: AC power switch, 2 channel level control; ∞ to +30 dB
Controls Rear: 30 Hz high-pass filter on/off, bridge/stereo/parallel mode
Signal Indicators: Signal present (green LED), clip (red LED), protection (red LED)
Power Indicators: 1 blue LED integrated with power switch
Input Connectors: Balanced XLR-F / combo
Output: Touch proof binding posts and Speakon NL4 connectors
Power Supply: AC Power: 100 VAC, or 110 120 VAC or 220 - 240 VAC (50 / 60 Hz)
Dimensions (WxLxH): 19in x 11.2in x 3.5in
Weight 12.1 lb
Tweet
Found it Cheaper? Click here and use our Price Beat section
Or call us on 02380 231949 and we will beat it over the phone.
To find out more about price beat click here
Or call us on 02380 231949 and we will beat it over the phone.
To find out more about price beat click here
Finance is offered* on selected products and/or on purchases of a certain total value.
More information on ++expected monthly payments can be found in your shopping cart.
More information on ++expected monthly payments can be found in your shopping cart.
*finance is subject to status. ++ all figures quoted are estimations and subject to change, figures may also change according to your curcumstances and the finance company that we use.
